Jobber drill set, bright
Drilling tools
• HSS Co5
• DIN 338
• Type Ti
• Angle of rake 130°
• Spiral angle 35°
• Profile ground
• Core thickness greater than normal
• Normal taper
• Shank (DIN) cylindrical
• Relieved cone
• Right-hand cutting
Supplied: in plastic cassette.
| EAN | Drill Ø h8 | Number of drills | Increasing by | Material | Coating | Steel <850 N | Steel <1000 N | Steel <1400 N | Steel <42 HRC | INOX | Ti, Ti alloy and special steels | Alu, NF metals, NF alloy | Copper, brass, bronze | Air | Oil | Emulsion | ME | ME_kurz |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4317784910750 | 1–5.9 mm | 50 Piece | 0,1 mm | HSS Co5 | Bright | 30 | 20 | 16 | 4 | 18 | 10 | 90 | 40 | Limited suitability | Recommended | Recommended | Piece | Piece |
| 4317784910767 | 6–10 mm | 41 Piece | 0,1 mm | HSS Co5 | Bright | 30 | 20 | 16 | 4 | 18 | 10 | 90 | 40 | Limited suitability | Recommended | Recommended | Piece | Piece |
| 4317784910774 | 1–10 mm | 19 Piece | 0,5 mm | HSS Co5 | Bright | 30 | 20 | 16 | 4 | 18 | 10 | 90 | 40 | Limited suitability | Recommended | Recommended | Piece | Piece |
| 4317784910781 | 1–10.5 mm | 24 Piece | 0.5 + K.B. mm | HSS Co5 | Bright | 30 | 20 | 16 | 4 | 18 | 10 | 90 | 40 | Limited suitability | Recommended | Recommended | Piece | Piece |
| 4317784910798 | 1–13 mm | 25 Piece | 0,5 mm | HSS Co5 | Bright | 30 | 20 | 16 | 4 | 18 | 10 | 90 | 40 | Limited suitability | Recommended | Recommended | Piece | Piece |